Fluke 28 II Ex Getting Started Manual page 14

28 II Ex
Getting Started Manual
Switch
Button
Position
N
M

J
(Yellow)
P
Q
Any
position
C
M
Any
position
MIN MAX
D
recording
Frequency
counter
10
Table 4. Pushbuttons
Set to capacitance
Set to temperature
Turn on ac low-pass filter
Set dc or ac current
Set dc or ac current
Change and set the range for the set function. To go to autoranging, hold the button down for
1 second.
Sets to °C or °F.
AutoHOLD (formerly TouchHold) captures the current measurement on the display. When a
new, stable measurement is sensed, the Product beeps and shows the new measurement.
Stops and starts recording. Does not erase recorded values.
Stops and starts the frequency counter.
Function