Ice-O-Matic CIM0320 Technical & Service Manual page 8

Elevation series cube ice maker. cim modular cubers

Hide thumbs Also See for CIM0320:

Table of Contents

ELEVATION SERIES CIM CUBERS

Route the refrigerant lines through the roof

opening. Follow straight line routing whenever

possible. Any excess tubing MUST remain inside

the building. Spiral the excess length of pre-

charged tubing inside the building. Use a

horizontal spiral to avoid any traps in the lines.

Have the roofing contractor seal the holes in the

roof per local codes.

The following remote ice makers incorporate the Mixing Valve in the Condenser. This configuration

allows up to a 100 foot calculated remote line set run. Reference the diagram on the next page to calculate

the maximum 100 ft. line set run. Maximum actual line set run is limited to 100 ft. Add 1/4 oz. of

refrigerant for each actual foot from 75 to 100 ft. actual line set run.

CIM Machine Model Number Remote Condenser Model Number

CIM0835/0836/0837

CIM1135/1136/1137

Verify the CIM machine is compatible with the remote condenser.

For more information contact your Ice-O-Matic distributor.

CIM0520/530

CIM0525/535

CIM0636

CIM1126

REMOTE CONDENSER GUIDELINES

CAUTION: The couplings on the sets of pre-charged

lines are self sealing when installed properly.

Carefully follow the instructions in the Remote

Condenser manual.

VRC1001B/RCA1001

VRC1061B/RCA1061

Table of Contents

Show Quick Links

Table of Contents

Cim1136