Ice-O-Matic CIM0320 Technical & Service Manual page 50

ELEVATION SERIES CIM CUBERS
Evaporator Top
Evaporator Cover
Water Pump
Splash Curtain
Sump
On the rear of the Evaporator Assembly, disconnect Harvest Assist Assembly, Purge Valve and
Purge Tube and remove from unit.
Clip Zip Ties holding Service Port tubes to rear of Evaporator. Remove 3) 1/4" screws on right side,
left side and center holding Evaporator Assembly to base.
Harvest Assist
Assembly
Cut Zip Ties
Remove 1/4" screws
EVAPORATOR REPLACEMENT
While recovering the refrigerant from the unit,
disconnect High and Low Float Switches,
Thermistor, Curtain Switch and Push Pad ribbon and
move the wiring clear of the area.
Connectors
Remove the Splash Curtain, Evaporator Cover, Top
Evaporator Cover, Water Distribution Tube,
Water Pump Tube and its connector, Sump, Water
Pump, and Float Switch Housing Assembly.
Water Pump Tube & Connector
Float Switch Housing
Purge Valve
47