AccuTemp Vision Operator's Manual page 25

User's manual | Vision™ Combi steamers | 05 SETTINGS
USB
(REQUIRES USB DISK)
INSERT THE USB DISK INTO THE COMBI STEAMER
ENTER THE SETTINGS MENU
SELECT ITEM 6. USB
FROM COMBI STEAMER TO USB
1 SELECT ITEM 6. 1 COMBI STEAMER TO USB
2 SELECT ON OF THE FOLLOWING ITEMS FLOOR DEPENDING ON
WHICH DATA YOU WISH TO COPY
6.1.1 PROGRAMS
6.1.2 HACCP
6.1.3 LOGS
6.1.4 ERRORS
6.1.5 SOUNDS
6.1.6 SETTINGS
3 PRESS
Data will start to be exported from the combi steamer to the USB
disk.
If the data is copied properly:
If an error occurs during copying:
If there are no files that can be copied:
4 RETURN BACK TO THE SETTINGS MENU
FROM USB TO COMBI STEAMER
1 SELECT ITEM 6. 2 USB TO COMBI STEAMER
2 SELECT ON OF THE FOLLOWING ITEMS FLOOR DEPENDING ON
WHICH DATA YOU WISH TO COPY
6.2.1 PROGRAMS
6.2.2 SOUNDS
6.2.3 LANGUAGES
6.2.4 WASHING
3 PRESS
Data will start to be exported from the USB to the combi steamer
Information about the copying procedure is the same as in 6.1
Combi steamer to USB (see above).
4 RETURN BACK TO THE SETTINGS MENU
The USB disk must be formatted in the FAT or FAT32 file system format. The names of the files and directories must maintain small/CAPITAL
letters.
When copying programs from a USB disk to a combi steamer, the programs on the USB disk contained in the file recipe.or2 must be located
directly in the root directory. When copying sounds from the USB disk to the combi steamer, the sound files *.wav must be located directly in the
root directory or in the directory sound.
When copying languages from the USB disk to the combi steamer, the language files *.lng must be located directly in the root directory or in the
directory language.
When copying washing programs from a USB disk to a combi steamer, the washing programs on the USB disk contained in the file clean.pac
must be located directly in the root directory.
a
a
DONE
Err
nonE
a
25