I Cooking - AccuTemp Vision Operator's Manual

User's manual | Vision™ Combi steamers | 04 COOKING

4 I COOKING

Meals may be prepared in the combi steamer either by manually setting the
parameters or by utilising saved or custom programs (up to 99 & 9 steps).
4.1 SETTING COMBI STEAMER FUNCTIONS
Before starting the cooking process, it is possible to set the following combi
steamer functions:
Cooking chamber preheating
TURNING ON
1 PRESS
2 SELECT
3 PRESS
If preheating is activated, after starting cooking by pressing START, the
oven first starts preheating (or cooling) the cooking chamber, the text
"Preparing temperature" will appear on the display, and after reaching
the set temperature (with a margin), the display will show the text "Insert
food". Only after opening and closing the door will the cooking time start
counting down.
TURNING OFF
1 PRESS
2 SELECT
3 PRESS
OFF will appear.
Symbol will flash.
Symbol will be lit.
Preheating is activated.
ON will appear.
Symbol will flash.
The symbol will disappear.
Preheating is deactivated.
Flap valve
(optional accessory)
The flap valve can only be set in modes
OPENING
1 PRESS
2 PRESS
CLOSING
1 PRESS
2 PRESS
Delayed start
TURNING ON
1 PRESS
2 SELECT
3 PRESS
4 SET THE
VALUE
5 PRESS
Delayed start automatically turns off
12
and .
OFF will appear.
Symbol will flash.
Symbol will be lit.
The flap valve is open.
ON will appear.
Symbol will flash.
The symbol will disappear.
The flap valve is closed.
OFF is shown.
Symbol will flash.
The current time hh.mm and
symbol are flashing.
Set the desired time at which the
combi steamer should start. The
set value is flashing.
The message
"Combi steamer will start in
hh.mm"
where hh.mm is the time that
you set.