Manual Settings - AccuTemp Vision Operator's Manual

User's manual | Vision™ Combi steamers | 04 COOKING

4.2 MANUAL SETTINGS

This option is utilised by more experienced users, who want to have the
cooking process parameters set exactly according to their requirements.
Set the cooking parameters manually according to your own discretion and
experience.
For cooking, the combi steamer utilises three basic modes - convection
mode, combi mode, and steam mode. Each mode has its pre-settings (see
chart to the right). However, you may enter the cooking process at any
phase and modify the time, temperature and humidity so that the result
meets your expectations.
Manual cooking process parameter settings
1 SELECT A COOKING MODE BY PRESSING ONE OF THE
BUTTONS
2 SELECT A COOKING PARAMETER
The current value of the selected parameter will start flashing.
When solidly illuminated, value is set,
It is not possible to change the humidity parameters in
CONVECTION
3 ADJUST THE VALUE ACCORDING TO YOUR DISCRETION
In the same way, modify the other parameters.
4 CONFIRM THE SETTING
5 START THE COOKING PROCESS
MODE or STEAM MODE..
DEFAULT VALUES
CONVECTION MODE
Pre-settings:
Processing time: 30 min.
Cooking chamber temperature: 356°F
Humidity: 0%
COMBI MODE
Pre-settings:
Processing time: 30 min.
Cooking chamber temperature: 320 °F
Humidity: 50 %
STEAM MODE
Pre-settings:
Processing time: 30 min.
Cooking chamber temperature: 212 °F
Humidity: 100 %
CONVECTION COMBI
13
STEAM