ProForm PATL50707.0 User Manual page 8

5. See the left inset drawing. Identify the two
Frame Spacers (11). Open the included packet
of grease, and apply grease to both sides of
both Frame Spacers. Then, identify the outer
side of each Frame Spacer.
Hold a Frame Spacer (11) between the Right
Upright (54) and the Lift Frame (23), with the
outer side of the Frame Spacer facing the
Right Upright. Attach the Right Upright to the
Lift Frame with an M10 x 60mm Patch Bolt (1),
an M10 Washer (14), and an M10 Star Washer
(9); do not tighten the Bolt yet.
6. See the left inset drawing. Identify the outer
side of the remaining Frame Spacer (11).
Hold the Frame Spacer (11) between the Left
Upright (53) and the Lift Frame (23), with the
outer side of the Frame Spacer facing the
Left Upright. Attach the Left Upright to the Lift
Frame with an M10 x 60mm Patch Bolt (1), an
M10 Washer (14), and an M10 Star Washer (9);
do not tighten the Bolt yet.
5
11
Inner
Side
Outer
Side
6
53
9
14
1
11
Inner
Side
Outer
Side
8
54
9
14
11
23
54
14
11
9
23
11
23
53
14
1
9
1
1
11
23