ProForm PATL50707.0 User Manual page 13

CONSOLE DIAGRAM
Note: If there are thin sheets of plastic
on the console, remove the plastic.
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective.
While the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
the touch of a button. As you exercise, the displays will
provide continuous exercise feedback. You can even
measure your heart rate using the built-in pulse sensor.
The console also offers six speed workouts. Each
workout automatically controls the speed of the tread-
mill as it guides you through an effective workout.
To use the manual mode of the console, follow the
steps beginning on page 14. To use a speed workout,
see page 16.
Note: To prevent damage to the walking platform,
always wear clean athletic shoes while using the
treadmill. During the first few minutes that the
treadmill is used, inspect the alignment of the walk-
ing belt, and center the walking belt if necessary
(see page 20).
Key
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not
do this, the console displays or other electrical
components may become damaged.
Plug in the power cord
(see page 12). Next, locate
the reset/off circuit breaker
on the treadmill frame near
the power cord. Switch the
circuit breaker to the reset
position.
Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above) and
slide the clip onto the waistband of your clothes. Then,
insert the key into the console. After a moment, the
displays will light. IMPORTANT: In an emergency sit-
uation, the key can be pulled from the console,
causing the walking belt to slow to a stop. Test the
clip by carefully taking a few steps backward; if the
key is not pulled from the console, adjust the posi-
tion of the clip.
13
Clip
Reset
Position