REA ScanCheck 3n Operating Manual page 33

Streamlining • Development • Automation
Electronic Devices and Systems
Optional Parameters (3rd Screen of Evaluation)
E-value deviation
E-value deviation:
Optional Parameters (4th Screen of Evaluation)
P-value deviation
P-value deviation:
Optional Parameters (5th Screen of Evaluation)
Brightness value Rmax
Dark value Rmin:
Size:
(corresponding. Z-Module
In addition, a second measurement of the 200% EAN Code from the
right-hand side of the calibration card can be measured:
Size:
(correspond. Z-Module
A size error is only displayed if the measured value is greater than 201%.
© REA Elektronik GmbH
D-64367 Mühltal-Waschenbach
+49 (0) 6154-638 0
+/-20 % (absolute +-10µm), Grade 4
+/-20 % (absolute +-10µm), Grade 4
+/-5 %
+/-3 %
100 %
330 µm
200 %
660 µm
REA ScanCheck 3 - August 2010
www.rea-verifier.de
Grade
+/- 1 %
+/- 3.3µm)
+/- 1 %
+/- 6.6µm).
REA
Page 33 of 89
Elektronik
GmbH