REA ScanCheck 3n Operating Manual page 28

Streamlining • Development • Automation
Electronic Devices and Systems
A progress display shows the progress in percent, from 0-100%. The transfer takes approx.
approx. 20 seconds, during which nothing appears to happen.
Only the label on the <Start Update> button changes to <Stop Update>.
When the data transfer is complete, the progress bar shows "complete" and a message appears that
the update files have been completely transferred. The update program can then be closed by pressing
the "Cancel" button.
© REA Elektronik GmbH
D-64367 Mühltal-Waschenbach
+49 (0) 6154-638 0
REA ScanCheck 3 - August 2010
www.rea-verifier.de
REA
The connected REA ScanCheck 3n must now be
selected from the list of possible REA verification
units by selecting it with a click on the left mouse
button.
The REA ScanCheck 3n appears in the list e.g.
with the name "SC3n_PoE-Master." If more than
one unit is listed with the same name, the
individual units can be differentiated by the
different information in the Description column
based on the different serial numbers. Ensure
that you have selected the correct unit and click
the <OK> button for confirmation.
The REA ScanCheck 3n must be activated and
the sleep mode must be deactivated.
Activate the window with the Update Server
program. The selected unit in the unit list is
accepted by pressing the <ADD> button.
The "Update Server" program now looks as
shown at left. By clicking with the left mouse
button on the <Start Update>, the transfer
program can begin transferring the data to the
verification unit.
After a short time, the REA ScanCheck 3n then
starts with the update program. The light diodes
underneath the display then illuminate in
alternation. The screen then turns black and there
are no additional displays on the screen except for
a command line.
The update requires approx. 3 to 5 minutes.
The unit then automatically restarts and then
displays the start screen again. The updated
version number should now appear in the version
display.
Elektronik
GmbH
Page 28 of 89