Table of Contents
Advertisement
(5) Disassembly of the Gear [13] and Motor (B) [26]
(a) Remove the Seal Lock Flat Hd. Screw M5 x 12 [11] to remove the Bearing Holder [12], Gear [13] and
Ball Bearing 6002VVCMPS2L [8] together. Put the spindle of the Gear [13] with hand-press to remove the
Gear [13] from the Bearing Holder [12]. Remove the Ball Bearing 6002VVCMPS2L [8] from the Bearing
Holder [12].
(b) Remove the Nylock Bolt (W/Flange) M4 x 12 [20] from Inner Cover (B) [21].
(c) Remove the Ball Bearing 609VVC2PS2L [22] from the pinion of Motor (B) [26]. Remove the Lock Lever
[23] and the Spring [31], then remove the two Special Bolts M5 [24] to remove Inner Cover (A) Ass'y [25].
[11]
[8]
(6) Removal of the Base Ass'y [34]
Extract the Roll Pin D6 x 50 [40] that connects the Base Ass'y [34] and the Housing [29]. Remove the Base
Ass'y [34].
[21]
[20]
[13]
[12]
[29]
[25]
[23]
[24]
[22]
[31]
Fig. 4
[34]
Fig. 5
--- 10 ---
[26]
[40]
Advertisement
Table of Contents
