Table of Contents
Advertisement
(2) Removal of the Protective Cover [9]
Remove the three Seal Lock Flat Hd. Screws M3 x 12 [6] and then the Bearing Cover [7]. Remove the Return
Spring [19] from the Saw Cover [18]. Remove the Protective Cover [9] from the Bearing Holder [12].
Remove the Bushing [10] from the Protective Cover [9].
(3) Removal of the Saw Cover [18]
Remove the Bolt Ass'y (Square) M6 x 22 [38]. Remove the Tapping Screw (W/Flange) D5 x 50 [14] and then
the Saw Cover [18].
(4) Removal of the Handle Cover [42]
Remove the six Tapping Screws (W/Flange) D4 x 16 (Black) [41] to remove the Handle Cover [42].
[8]
[7]
[6]
[14]
[12]
[11]
[10]
[9]
Fig. 2
[18]
[33]
[38]
Fig. 3
--- 9 ---
[19]
[39]
Advertisement
Table of Contents
