Table of Contents
Advertisement
CAUTION!
Do not use water for cleaning the hot plates!
o Do not clean the Crêpe Plates with a detergent at any time.
o After some time a crust remains on the Crêpe Plates. This is absolutely normal.
This is the heat-up coating which flakes off easily. Rub the coat thinner regularly
(according to use). This will avoid heavy stains and the surface condition will be
preserved.
Cleaning the burner
o Check the condition of the burner ports regularly. If these are blocked, brush off the
burner arms with a stiff-bristled brush.
o Do not clean the injectors with metal objects/items. These could alter the technical
attributes of the burner.
o Remove the injectors for cleaning purposes (see paragraph „Settings"). Immerse
the injectors into a grease dissolving agent, rinse the injectors thoroughly and dry
them properly. We recommend to replace the gaskets during every cleaning
procedure.
o Make sure that you also regularly check the connection lead to the gas pipe or gas
cylinder and replace these parts if necessary.
o Only use a soft cloth and make sure you never use any kind of abrasive agents or
pads which could scratch the surface.
6.3 Safety instructions for maintenance
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 28 -
phone: +49 (0) 5258 971-0
fax:
+49 (0) 5258 971-120
Advertisement
Table of Contents
