Initial Start-Up - UNITED OFFICE UAV 250 A1 Operating Instructions Manual

Initial start-up

NOTE
► As every shredder is tested for functionality after manufacture, it is possible
that you may find paper residue in the cutting blades.
■ Push the small waste container
container
■ Place the cutter attachment
mains cable sticks out to the rear.
■ Insert the plug into a mains socket.
Use
You can shred up to 10 sheets (80 g/m
CAUTION! PROPERTY DAMAGE!
Never feed paper into the cutter opening if it still has paper clips larger
than 25 mm attached! These could damage the cutting blades.
Switching the appliance on
■ Set the switch
Inserting paper
■ Insert paper into the cutter opening for paper
format.
The motor starts automatically and switches itself off automatically if no further
paper is inserted. You can shred up to 10 sheets (80 g/m
time.
NOTE
► Regularly remove any residue left in the cutting blades with a suitable tool,
e.g. a pair of tweezers. Ensure that the appliance is unplugged before
doing this.
GB │ IE │ NI
■ 6
│
onto the rails inside the large waste
.
onto the large waste container
to "AUTO" for shredding.
2
paper) at the same time.
from above and in portrait
2
paper) at the same
UAV 250 A1
so that the