Bluetooth Cannot Be Played Back - Denon PMA-600NE Owner's Manual

Contents Connections

Bluetooth cannot be played back

Bluetooth devices cannot be connected to this unit.
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner's Manual of the Bluetooth device to enable the Bluetooth function.
0
Bring the Bluetooth device near to this unit.
0
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
0
Turn the power of the Bluetooth device off and on again, and then try again.
0
Change the analog mode setting to Off. The Bluetooth function does not work when the analog mode setting is On. (v p. 27)
0
To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. (v p. 28)
0
The sound is cut off.
Bring the Bluetooth device near to this unit.
0
Remove obstructions between the Bluetooth device and this unit.
0
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN devices and other Bluetooth devices.
0
Reconnect the Bluetooth device.
0
Front panel Rear panel
Playback Settings
Remote control 41
unit
Tips
Index
Appendix