Table of Contents
Advertisement
Quick Links
SHOWER HANDBOOK
After Sales Service
We offer a technical advisory service on the telephone to installers and other customers with
problems in the field.
RING 0844 372 7766 (UK ONLY)
Remember to quote the exact type of shower, as written on the front of the shower and on this leaflet.
The model and serial number are located on the bottom face of the sh ower.
Make a note of those numbers here, and be sure to quote them if you call for advice.
Model Number: 53-_ _ _ _ _ _ _ _ _
/
Serial Number: _ _ _ _ _ _ _ _ _ _ _
Note: You may be charged for a service call if you do not have the serial number.
Full details of terms and conditions are available on request from: -
IMPORTANT
This booklet should be given to the customer
Applied Energy Products Ltd, Morley Way, Peterborough, PE2 9JJ
after installation and demonstration.
Website : www.creda-showers.co.uk
(A3 Leaflet: 559-2355-40B)
12
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Creda Aquathermo 53 series
Summary of Contents for Creda Aquathermo 53 series
- Page 1 Full details of terms and conditions are available on request from: - IMPORTANT This booklet should be given to the customer Applied Energy Products Ltd, Morley Way, Peterborough, PE2 9JJ after installation and demonstration. Website : www.creda-showers.co.uk (A3 Leaflet: 559-2355-40B)
- Page 2 Thank you for choosing a quality “Creda” product manufactured in Peterborough, England. This page has been left blank for the addition of any notes you may wish to make: - Contents User information Page Installer Information Page How to use your shower...
- Page 3 d) Commissioning To Change Flow Rate Press the flow button in the centre Ensure the water and electricity are switched on to the unit. (Confirmed with a single bleep) Press the START/STOP button then change the temperature setting to number 1 by pressing the COOLER button 5 times.
- Page 4 Purging Plumbing While the unit is in Over Temperature shutdown mode We recommend that a WRAS (Water Regulations Advisory Scheme) listed isolating valve be fitted press the cooler and flow button together for 20 between the rising main and the unit. seconds.
- Page 5 Installation Instructions How Your Shower Works Water is heated ALL WIRING AND INSTALLATION Fig. 8 instantaneously as it MUST BE SUPERVISED BY A SUITABLY QUALIFIED PERSON. flows over the heaters in We recommend that the installation be done in the following sequence: - the plastic heat exchanger assembly.
- Page 6 Troubleshooting Professional Service Check List This additional checklist is provided for the benefit of the qualified service representative. If the performance of the shower deteriorates in service, follow the checks in the “self help” table below before calling out the contractor. Warning.
Need help?
Do you have a question about the Aquathermo 53 series and is the answer not in the manual?
Questions and answers