Setting Up Mobility Center To Use Remote Control - Fujitsu LifeBook N series User Manual

Infrared control cable
Infrared receiver
Set-top box
Figure 10. Applying light emitter to set-top
receiver
To optical remote
control receiver
Figure 11. Set-top box with light emitter attached
Setting up Mobility Center to use remote
control
In order for your remote control to work with your
LifeBook, you must first ensure that it is able to
"wake up" using a USB device. To do so, perform
the following simple steps:
1. Click on Start -> Control Panel.
2. If you are in Classic View, double-click the
Windows Mobility Center icon. If you are in
Control Panel Home View, first click Mobile
PC, then select Windows Mobility Center.
3. Find the tile labeled "Wake up by USB device",
and see if it is set to Enable or Disable.
4. If it is set to Enable, click the [Change] button.
If it is set to Disable, no action is required.
Using the remote control
Light emitter
To use the remote control, you must use the
remote control receiver included with the remote
control. If your system has an infrared port, it
cannot be used to operate the remote control.
Note the following when using the remote control:
• The receiver should be placed in a location
where it is not obstructed. You should be able
to point the remote control directly at the
receiver. Keep the receiver out of direct
sunlight, otherwise reception may prove faulty
and the effective distance may be affected.
• If a plasma display, plasma TV, or halogen
heater is located close to the device, the
remote control may not work properly due to
infrared interference. Relocate the devices if
they interfere with the remote control
operation.
• The infrared control cable should be fixed as
close as possible to the remote control receiver
of the set-top box so as to avoid directing the
signal to the computer's infrared port.
Using the remote control is fairly intuitive. For
specific information on using particular features,
click the Start button to display the main menu.
Scroll down to Settings and press the OK button.
A submenu containing a variety of help topics
appear. Click on the desired submenu to access
related topics.
To exit the Help menu, click on the Start button
to return to the main menu.
TV Tuner User's Guide
41