Fujitsu LifeBook N series User Manual page 75

Hide thumbs Also See for LifeBook N series:
Table of Contents

Advertisement

Problem
Memory Problems
Your Info menu of
Your memory upgrade
the BIOS setup
module is not properly
utility information,
installed.
does not show the
correct amount of
You have a memory
installed memory.
failure.
Modem Problems
Messages about
Messages about modem
modem operation.
operation are generated
by whichever modem
application is in use.
USB or IR Device Problems
You have installed
The device is not properly
a USB or IR
installed.
device. Your
LifeBook notebook
The device may have
does not recognize
been installed while an
the device, or the
application was running,
device does not
so your LifeBook is not
seem to work
aware of its installation.
properly.
Your software may not
have the correct software
driver active.
You may have the wrong I/
O address selected for
your device.
Your device and another
device are assigned the
same I/O address.
Possible Cause
Remove and re-install your memory upgrade
module.
Check for Power On Self Test (POST)
messages.
See your application software documentation
for additional information.
Remove and re-install the device.
Close the application and restart your
LifeBook notebook.
See your software documentation and activate
the correct driver.
See your device documentation and software
documentation to determine the required I/O
address. Change the settings in the BIOS
setup utility.
Check all I/O addresses located within the
BIOS setup utility and any other installed
hardware or software to make sure there are
no duplications.
Tr o u bl e s h o o t i n g
Possible Solution
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents