Emerson FreezeAlarm FA-I-CCA User Manual page 33

What you will hear when the FreezeAlarm calls you with an alarm
"Hello, this is your Automated Monitoring System.
There is an alarm condition at your remote
monitored location, the following alarms currently
exist or have occurred recently."
"There is a temperature alarm at
location XXXX. The power at location
XXXX has been out for XXXX minutes
and is currently ON/OFF. There is a
battery alarm at location XXXX.
Please check conditions at your
monitored location immediately."
"There is a temperature alarm at
location XXXX. The power at location
XXXX has been out for XXXX minutes
and is currently ON/OFF. There is a
battery alarm at location XXXX.
Please check conditions at your
monitored location immediately."
"To cancel the alarm call-out,
enter your four digit security
code, followed by the pound
key."
Incorrect
Security Code
"Incorrect security code.
Enter your four digit security
code followed by the pound
key."
Incorrect
security
code.
"Incorrect security
code, good bye."
Call-Out Menu
NOTE: If there is a
personal message
recorded, the
Freeze Alarm would
answer as follows:
"[Personal message].
There is an alarm
condition at
your remote ...."
Correct
Security Code
"The alarm callout is now
Correct
canceled. To return to the
Security
main menu, press 1,
Code
otherwise hang up."
"You are now in the main
menu. . . ."
This page intentionally left blank
NOTE: Only play
the alarms which are
currently in fault.
1
Call out menu
33