Emerson FreezeAlarm FA-I-CCA User Manual page 32

What you will hear when you call into your FreezeAlarm from a remote location
"Hello, this is you Automated Monitoring System.
The current temperature is xx degrees, the power
is on/off and the battery is at x.xx volts."
No Alarms
Present
"There are no alarm conditions
occurring at this time. To access the
main menu, enter your four digit
security code followed by the pound
Correct
Incorrect
security
Security code.
code.
"Incorrect security
code, good bye."
32
key."
enter your four digit security
Incorrect
Enter your four digit security
security
code.
Call-In Menu
NOTE: If there is a
personal greeting
message recorded, the
Freeze Alarm would
answer as follows:
"[Personal message].
The current temperature
is xx degrees, ...."
One or more
alarms present
"There is a temperature alarm at
location XXXX. The power at location
XXXX has been out for XXXX minutes
and is currently ON/OFF. There is a
battery alarm at location XXXX.
Please check conditions at your
monitored location immediately."
Alarm call-out has
been canceled.
"To access the main menu,
code followed by the pound
key."
Incorrect
Security code.
"Incorrect security code.
code followed by the pound
key."
Incorrect
security code.
Correct
security code.
"You are now in the main
Call in menu
NOTE: Only play
the alarms which are
currently in fault.
Alarm call-out
is active.
"To cancel the alarm call-out,
enter your four digit security
code followed by the pound
key."
Incorrect
Correct
Security code.
security
code.
"Incorrect security code.
Enter your four digit security
code followed by the pound
key."
Correct
security
code
"The alarm call-out is now
canceled."
menu."
Correct
security
code.