Calling Into Your Freezealarm To Check Status And Change Program Settings - Emerson FreezeAlarm FA-I-CCA User Manual

NOTE: If you leave your FreezeAlarm in the STANDBY mode, the FreezeAlarm
will not call you if there is an alarm and you will be unable to call into your
FreezeAlarm from a remote location.

3.2 Calling into your FreezeAlarm to check status and change program settings:

One of the best features of the FreezeAlarm is the ability to remotely check the current
temperature, power status and battery status at your monitored location. You can even
remotely change any of the program menu settings including the call-to phone numbers
if desired. If you have an answering machine or voice mail at the monitored location,
make sure you read the section Use of an Answering Machine or Voice Mail at the
Monitored Location in section 3.3 before proceeding. The following is the procedure
for remotely accessing your FreezeAlarm to check current conditions or change
program menu options.
To Check Current Conditions at your Monitored Location:
1. Call the telephone number of your monitored location where the FreezeAlarm is
located
2. When the FreezeAlarm answers, you will hear the following:
Hello, this is your Automated Monitoring System (Or you will hear your
custom greeting message that was recorded earlier)
The current temperature is # # degrees, the power is on (or off), and the
battery is at #.# # volts.
There are no alarm conditions occurring at this time.
To access the main menu, enter your four digit security code followed by the
pound "#" key.
3. You can either hang up or go into the main menu by entering your four digit
security code.
To Remotely Change any Program Menu Settings Including Call-To Phone
Numbers:
1. Call the telephone number of your monitored location where the FreezeAlarm is
located
2. When the FreezeAlarm answers, you will hear the factory greeting message or your
custom greeting message recorded earlier. This will be followed by the current
temperature, power status and battery voltage at your monitored location.
3. Enter your four digit security code followed by # to access the main menu.
4. Press 2 to access the Program Menu.
5. Press the number of the menu option you wish to change and follow the prompts.
See menu option explanations starting on page 10 or refer to the menu flow charts
in Appendix A.
3.3 Use of an Answering Machine or Voice Mail at the Monitored Location:
If you have an answering machine or voice mail at the monitored location where your
FreezeAlarm is located, there is an easy way to still use your answering machine or
17