Emerson FreezeAlarm FA-I-CCA User Manual page 2

For easy future reference during technical support and service, it is recommended that
you write your purchase date and the "date code" of the unit in the spaces below. The
"date code" can be found on the bottom instruction label on the FreezeAlarm unit itself.
You will also need a four digit security code. This is used to prevent unauthorized
remote access to your FreezeAlarm. The factory default security code is 9999. You
may keep this or change it to your unique code. Your security code must contain four
numeric digits.
Purchase Date: ___________________
Date Code: ______________________
Security Code: ___________________
Technical Support: Monday-Friday, 8am to 5pm, Central Time
Every effort has been made to ensure the information in this user manual is complete,
accurate and up-to-date. Emerson Control Products, Inc. assumes no responsibility for
results of errors in this manual nor can it guarantee that changes in equipment made by
other manufacturers and referred to in this manual will not affect the operation or
intended use of the FreezeAlarm.
2
Phone: 800-880-6000
Email: cpi-customerservice@emerson.com
Web: www.controlproductsonline.com
Copyright © 2017 by Emerson Control Products Inc.
Document 42420002G – Revision G
FreezeAlarm is a trademark of Emerson Control Products Inc.
Touch Tone® is a registered trademark of AT&T
This manual may not be reproduced, modified
or distributed without permission from Emerson Control Products Inc.