Table of Contents
Advertisement
8. Press 1 to review or program phone number 1.
9. Press 0 to enter a new phone number or to change an existing number.
10. Enter the telephone number followed by the pound "#" key.
11. Press 1 to return to the Phone Number Menu.
12. Press 2 to program phone number 2.
13. Press 0 to enter a new phone number or to change an existing number.
14. Enter the telephone number followed by #.
15. Press 1 to return to the Phone Number Menu.
16. Press 3 to program phone number 3.
17. Press 0 to enter a new phone number or to change an existing number.
18. Enter the telephone number followed by #.
19. Press 1 to return to the Phone Number Menu.
20. Press 1 to return to the Program Menu
21. Hang up or change any of the other settings as needed.
22. After programming is completed, UNPLUG YOUR PROGRAM PHONE from
the front PROGRAM JACK!
23. FLIP THE TOGGLE SWITCH ON THE FRONT TO THE "ON" POSITION!
If this is the first time you have programmed this FreezeAlarm, the factory default
settings for the other menu options are as follows:
Security Code ......................................................................................................... 9999
Temperature Alarm Setpoint ................................................ 45° Fahrenheit or Celsius
Number of rings before the unit answers (incoming ring count) ........................5 rings
Number of minutes the power should be out before calling with a power alarm ...... 60
Greeting Message: .............. "Hello, this is your automated monitoring system"
Alarm Message: .................. "Hello, this is your automated monitoring system. There
IMPORTANT WARNING! After Programming, you must
return the front toggle switch to the ON position or the
FreezeAlarm will not call you if an alarm condition occurs and
you will be unable to call into your FreezeAlarm remotely!
2.2 Explanation of Program Menu Options:
Each of the various programming options is explained in detail below. Review this
before proceeding to program your FreezeAlarm.
Review or Program Telephone Numbers (Menu Option 1):
Program your call-to phone numbers here. You can also review, change or delete any
existing phone numbers here if needed as well. The Intermediate FreezeAlarm can dial
up to three phone numbers with each phone number consisting of up to 60 digits. You
can include pauses and the star key (*) as part of your phone number to accommodate
calling cards, different phone features and pager systems. These phone numbers are
referred to throughout the rest of this manual as "call-to phone numbers".
10
is an alarm condition at your remote monitored location.
The following alarms exist or have existed recently."
Hide quick links:
Advertisement
Table of Contents
