Main Menu - Emerson FreezeAlarm FA-I-CCA User Manual

"You are now in the main menu.
For current status press 1.
To enter the program menu, press 2."
2
"To review or program phone numbers, press 1.
To review or program the temperature alarm set-point, press 2.
To review or program the security code, press 3.
To review or program the number of rings before the unit
answers, press 4.
To review or program the number of minutes the power should be
out before calling with a power alarm, press 5.
To review or record messages, press 6.
To return to the main menu, press 7."
6
"To review or
program the alarm
message press one.
To review or program
the greeting
message, press two.
To return to the
programming menu,
press 3."
1
1
2
"Your current alarm mesage
is xxx. To change press
zero or press one to return
to the programming menu."
Main and Program Menu Flow Chart
1
7
1
1
1
1
3
1
"Your current greeting mesage
is xxx. To change press zero
or press one to return to the
programming menu."
0 "Begin recording after the
tone. When you have
finished recording, press the
#
pound key."
APPENDIX A
"The current temperature is xx
degrees, the power is on/off and the
battery is at x.xx volts.
"To review or program phone number one , press 1.
To review or program phone number two, press 2.
1
To review or program phone number three, press, 3.
4
"Phone number (One, Two, Three)
is currently xxxx, to change, press
zero or press 1 to return to the
phone number menu."
"The (high / low)
temperature alarm
setpoint is currently xx
2
degrees. To change,
press zero, or press one
to return to the
programming menu."
"The security code is currently
xxxx. To change, press zero,
3
or press one to return to the
programming menu."
"The number of rings before the
unit answers is currently xx. To
4 change, press zero, or press one
to return to the programming
"The number of minutes for a
power failure alarm is currently
5
xx. To change press zero or
press one to return to the
programming menu."
0
#
To return to the programming menu, press 4."
1,2,3
1,2,3
1
#
0
#
0
#
0
menu."
0
#
"Begin recording after the
tone. When you have
finished recording, press the
pound key."

Main Menu

"Using the telephone
0
keypad, enter the
phone number
followed by the
#
pound key."
"Enter the
temperature
alarm setpoint
followed by the
pound key."
"Enter your four digit
security code
followed by the
pound key."
"Enter the number
of rings followed by
the pound key."
"Enter the number of
minutes followed by the
pound key."
31