Rack-Mounting The Cisco Asr 1004 Router - Cisco ASR 1004 Overview And Installation

Rack-Mounting the Cisco ASR 1004 Router

Note Make certain that the cable-management 'U' feature device has the open end pointing upwards when you attach
it to the chassis after the chassis is installed in a rack.
Figure 6: Attaching the Cable-Management Brackets to the Cisco ASR 1004 Router
1
2
Step 6 Screw the cable-management bracket to each side of the rack-mount brackets already attached to the chassis. Use two
screws for each cable-management bracket. Use the package of four screws.
Step 7 Check that all screws are securely tightened.
What to Do Next
You have completed a tabletop or equipment shelf chassis installation. Go to the
Connection, on page 21
Rack-Mounting the Cisco ASR 1004 Router
The Cisco ASR 1004 Router can be installed with both front or rear rack-mount brackets.
Cisco ASR 1000 Series Router Hardware Installation Guide
10
Cable-management bracket
screws
Cable-management bracket
to continue the installation.
Cisco ASR 1004 Router Overview and Installation
3
—
Chassis front rack-mount
bracket ear
—
Attaching a Chassis Ground