Table of Contents
Advertisement
8
Remote control
To use the remote control, point its infrared diode at the infrared sensor on the unit and press
the desired buttons. The maximum operating distance is about 9 m. The device will only
respond to the remote control signals if it is not controlled via DMX.
1 [STAND BY]
Stops the automatic mode and blackouts the unit. The display shows 'StoP' . In this
mode, the device responds to the remote control.
2 [Dimmer + / –]
Adjusts the light intensity between 0 and 100%. Press [Dimmer +] repeatedly or keep the
button pressed to increase the light intensity. Press [Dimmer–] repeatedly or keep the
button pressed to decrease the light intensity.
3 [SOUND OFF]
Deactivates the sound-control.
PicoBeam 30 Quad LED
Remote control
49
Advertisement
Table of Contents
Need help?
Do you have a question about the PicoBeam 30 Quad LED and is the answer not in the manual?