Fun Generation PicoBeam 30 Quad LED User Manual page 41

Motor Set
Recording scenes
Press [DOWN], repeatedly if necessary, and confirm with [ENTER] to call up the menu item
. Press [ENTER] again. The display shows
whether the LED lights up in DMX mode during the movements of the device head or not.
Press [ENTER] to call up the function. Use [UP] and [DOWN] to select 'on' and press [ENTER] to
enable this function (LED 'off' on DMX-controlled movements). Select 'oFF' and press [ENTER]
to disable this function (LED 'on' on DMX-controlled movements).
Press [MODE], repeatedly if necessary, until the display shows
Press [DOWN], repeatedly if necessary, and confirm with [ENTER] to call up the menu item
Here you can assign the scene currently performed by the device to the memory location for
the scene .
Press [ENTER]. The display shows 'no' . Press [UP] or [DOWN] and confirm the display 'Yes' with
[ENTER] to save the scene. This will overwrite the previously saved parameters for this scene.
Press [MODE], repeatedly if necessary, until the display shows
PicoBeam 30 Quad LED
. This function allows you to specify
again.
again.
Operating
.
41