Programme Menu - Fun Generation PicoBeam 30 Quad LED User Manual

7.2.3 Programme menu

Speed
Press [DOWN] repeatedly while 'A001' is flashing on the display to select one of the 4 preprog-
rammed shows 'PrG1' to 'PrG4' . Press [ENTER] twice to open the Programme menu and to
change show parameters as desired.
The display shows . Press [ENTER] to then select a value between 000 and 255 for the
duration for which the head should remain in each programmed position before it moves to
the next by pressing [UP] and [DOWN].
When the display shows the desired value press [ENTER] to save the settings. To change the
menu item without making any changes, press [MODE].
PicoBeam 30 Quad LED
Operating
35