Fun Generation PicoBeam 30 Quad LED User Manual page 30

Operating
Selecting the number of DMX
channels
DMX break
30
The display shows 'ChS' . Press [ENTER] to then select the number of DMX channels to be used
by the device by pressing [UP] and [DOWN]. Control via 3, 8 or 13 channels is available.
When the display shows the desired value press [ENTER] to save the setting and then [DOWN]
to change to the next menu item. To change the menu item without making any changes,
press [MODE].
The display shows 'brk' . Press [ENTER] to then select one of the options for the behaviour of
the device in case the DMX connection is interrupted by pressing [UP] and [DOWN]. Choose
'Hold' if you want the device in that case to maintain the state that corresponds to the last
received DMX signal. Choose 'Hold' if you want the device in that case to perform an automatic
run. Choose 'Sound' if you want the device in that case to perform a sound-controlled auto-
matic run. Choose 'Sound' if you want the device in that case to return to its home position.
When the display shows the desired value press [ENTER] to save the setting and then [DOWN]
to change to the next menu item. To change the menu item without making any changes,
press [MODE].
moving head