Remote Control - Fun Generation ClubFX-1 Beam Flower40W Quad User Manual

Remote control

8 Remote control
50
To use the remote control, point it with the infrared diode to the infrared sensor on the unit
and press the desired buttons. The maximum distance from the unit is about 9 m. The device
will only respond to the remote control signals if it is not controlled via DMX.
1 [STAND BY]
Stops the automatic mode and blackouts the unit. The display shows 'Stop' . In this
mode, the device responds to the remote control.
2 [Dimmer + / –]
Adjusts the light intensity between 0 and 100%. Press repeatedly [Dimmer +] or keep the
button pressed to increase the light intensity. Press repeatedly [ Dimmer–] or keep the
button pressed to decrease the light intensity.
3 [SOUND OFF]
Deactivates the sound-control.
LED flower effect