Advertisement
SCAN I <1111<1111 . ..,...,. ) button
This is for quickly finding a particular point in the program
from which you wish to play the disc. Scanning continues for
as long as you keep the SCAN button depressed.
..,.., : Forward direction
..,...,. : Reverse direction
DISC TABLE
When power is switched on, and OPEN/CLOSE button is pres-
sed, the disc table is expelled outward.
PAL1NTSC
0,DPIONEER
POWER indicator
When power is turned on, the indicator lights up.
LASER BARCODE termlnal
(stereo miniature phone jack)
A terminal for connecting an optlonal remote control unit RU- ,...
V103 In the wired mode.
To be connected when using the optlonal bar coda r11d1r UC-
V 104BC In the wired mode.
PANEL FACILITIES
STILL/STEP
I
<111111.
II ... )
button
Functions only during CAV disc playback.
When either end of the button is pressed, the unit will enter
frame-by-frame playback. Then, when the
I I ...
end is pres-
sed, the picture will advance forward frame-by-frame. When
the
<11111
I
end is pressed, the picture will reverse frame-by-fra-
me.
NOTE:
If
this button is pressed during CL
V
disc playback, "CL
V"
ap-
pears on the screen to indicate that the button does not func-
tion.
--~--C=:J
LA.11111 &AIICOOI
~----------:!!
POWER switch
Press to turn the power on and off.
DISPLAY button
This button is used to display or erase chapter number and
frame numbers on the TV screen.
When the power is turned ON with this button pressed, the
function switches to setting mode. (see page 14)
~
NOTE:
• During CL V disc playback, elapsed time numbers
will be
displayed in place of frame numbers.
• When only the DISPLAY button is pressed, the display ap-
pears and reappears alternately each time the button is
pressed.
11
<DRE1006>
En
Advertisement
