N Etwork Port - Riello NetMan 202 plus User Manual

N
ETWORK PORT
NetMan plus connects to 10/100 Mbps Ethernet networks by means of connector RJ45 (see
paragraph "Specifications for the cabling of the network cable"). The LEDs built into the connector
describe the status of the network:

Left LED:
1. on and yellow if the 10/100Mbps mode link is present
2. on and green if the 10Mbps mode link is present

Right LED:
1. on and yellow during transmission in full-duplex mode
2. on and green during transmission in half-duplex mode
M -USB
ICRO COMMUNICATION PORT
NetMan plus makes available an usb communication port through which it is possible to configure
NetMan plus (see paragraph "Configuration via RS-232 serial line")
N
ETWORK SERVICES
NetMan plus implements a series of services based on the main network protocols. These services
can be activated or deactivated according to requirements (see paragraph "Configuration"). A brief
description for each of these is given below.
SSH
By means of a ssh client (available on all the main operating systems) a remote connection with
NetMan plus can be established to change its configuration (see paragraph "Configuration via
ssh").
Serial network
It's possible to enable a network connection together with Serial network compatible software (for
example UPSTools) for UPS event log download.
Wake-on-LAN
NetMan plus can send "Wake-on-LAN" command for remote computers boot.
- ENGLISH -
- 8 -