Riello NetMan 202 plus User Manual page 40

SNMP 3
V CONFIGURATION
For configuring SNMPv3 access, is necessary to edit snmp.conf. This file can be downloaded and
uploaded with FTP with user "admin" (default password is "admin").
If this file is not present, SNMPv1 will be used.
Each line of the file is parsed by netman 202 plus and must begin with one of these keyword:

#: for comment, the line is skipped.

addUser: for adding a new user and setting the passwords

addGroup: for putting a user into a group

addAccessEntry: for enabling access privileges to a group

addView: for adding privileges

addManager: for adding SNMP Manager which will receive SNMP traps.
The correct syntax for addUser is:
addUser <userName> <authProtocol> <privProtocol> <authPassword> <privPassword>
<userName> is the name of the user.
<authProtocol> is the protocol for authentication of this user during SNMP sessions. Possible
values are:

noauth (no authentication will be used)

md5 (MD5 will be used for authentication)

sha (SHA will be used for authentication)
<privProtocol> is the protocol for privacy of this user during SNMP sessions. Possible values are:

nopriv (no privacy will be used)

des (DES will be used for privacy)
<authPassword> is the password for authentication. It must be set to * when not used.
<privPassword> is the password for privacy. It must be set to * when not used.
The correct syntax for addGroup is:
addGroup <securityModel> <userName> <groupName>
<securityModel> is the security model. When using authentication and/or privacy, securityModel
must be USM. Possible values are:

USM (User-based Security Model with SNMPv3)

v2 (SNMPv2)

v1 (SNMPv1)
<userName> is the name of the user, must match one of the user name defined with addUser.
<groupName> is the name of the group.
Please note that a userName can be assigned to only one group.
The correct syntax for addAccessEntry is:
addAccessEntry <groupName> <contextName> <securityModel> <securityType> <contextMatch>
<readView> <writeView> <notifyView>
<groupName> is the name of the group to which this access right applies, must match one of the
group name defined with addGroup.
<contextName> is the name of the context.
<securityModel> is the security model that must be used in order to gain access to this access
right, must match the security model defined with addGroup.
- ENGLISH -
- 40 -