Technical Data - Riello NetMan 202 plus User Manual

TECHNICAL DATA

S
PECIFICATIONS FOR THE CABLING OF THE NETWORK CABLE
To connect the device to the Ethernet (10Base-T) or Fast Ethernet (100Base-T) network, a UTP
(Unshielded Twisted Pair) or STP (Shielded Twisted Pair) cable with RJ45 connectors is required.
The cable must conform to the standard IEEE 802.3u 100Base-T with 2 pairs of UTP cables of
category 5 or higher. The cable between the adaptor and the hub must not be more than 100m and
not less than 2.5m.
Pins 1 and 2 must be connected to one twisted pair, pins 3 and 6 to another.
T
ECHNICAL SPECIFICATIONS
POWER SUPPLY
ENVIRONMENTAL
CONDITIONS
- ENGLISH -
NETWORK CABLE CONNECTIONS
Signal
TX+
TX-
RX+
RX-
NetMan 202 plus
Input voltage
Maximum input current
Operating temperature
Storage temperature
Operating relative humidity
Storage relative humidity
- 54 -
Pin # to Pin #
1   1
2   2
3   3
6   6
12
[Vdc]
200
[mA]
[°C] 0 ÷ +40
-5 ÷ +50
[°C]
80 (max)
[%]
[%] 90 (max)