Time Setting Menu - Riello NetMan 202 plus User Manual

After pressing "ESC" and "Y" to confirm exit from the menu, a screen is displayed summarizing the
current settings (see image below). Press the "ENTER" key to return to the main menu. The
configuration must however be saved to make it effective after restart of the device (see "Save and
load" menu).
Hostname
Current IPv4 addr.: 10.1.10.187/16 (255.255.0.0) (active)
Current IPv6 addr.: fe80:0:0:0:260:35ff:fe02:4184/64 (active)
Default IPv4 GW
Ethernet Address
Primary DNS
Secondary DNS
DNS Timeout
DHCP Server
DHCP Enabled
DHCP Lease Ends
Mailhost
Restore From Flash: Not Committed

Time setting menu

/------------------------/
/ Time setting
/------------------------/
Set time.......:<--
Set timezone...:
Sync with NTP..:
Scheduled NTP..:
From this menu the time and date of the device can be set as described in the following table.
Command
Set time
Set timezone
Sync with NTP
Scheduled NTP
- ENGLISH -
: ups_server.mynetwork.domain
: 10.1.4.1
: 00:60:35:02:41:84
: 10.1.4.2
: 10.3.4.1
: 0 (ms)
: 10.1.5.1
: true
: Sun Jun 05 00:00:12 GMT 2005
(66 hr, 40 min, 38 seconds left)
: mymailserver
/
Description
To configure the time and date manually
To configure the time zone
To synchronize the clock with an NTP server
To configure the scheduled NTP
- 22 -