Activation 1 Menu - Riello NetMan 202 plus User Manual

Activation 1 menu

/------------------------/
/ Activation 1
/------------------------/
Enable telnet..:[ON/off]<--
Enable HTTP....:[ON/off]
Enable Modem
Enable SNMP....:[ON/off]
Enable UDP.....:[ON/off]
With this menu the services implemented in NetMan plus can be activated or deactivated:
Use the ENTER key to change the selected configuration ("ON" or "OFF").

ON (green characters): service active

OFF (red characters): service not active
It is recommended to activate only the services used.
Services 2 menu
/------------------------/
/ Services 2
/------------------------/
WakeOnLan addr.:<--
WakeOnLan delay:
Activation.2...:
Sensors config :
I/O Sensors....:
Threshold sens.:
With this menu the configuration screens of the various services can be accessed as described in
the following table.
Menù
WakeOnLan addr.
WakeOnLan delay
Activation 2
Sensors. config
I/O Sensors
Threshold sens
As well as being configured, the services must also be activated to function correctly (see
paragraph "Activation 2 menu"). It is recommended to activate only the services used.
/
Tx:[on/OFF]
/
Funzione
To configure the Wake-on-LAN service
To configure the services to be activated
To configure the environmental sensors
- ENGLISH -
Enable FTP.....:[ON/off]
Enable DataLog.:[ON/off]
Enable Modem
Enable Email...:[ON/off]
Enable Report..:[ON/off]
- 31 -
Rx:[on/OFF]