Installation And Connection - Oasis Ci 21 Installation Instructions Manual

3.INSTALLATION AND CONNECTION

3.1 Installation illustration
Installation items:
The factory only provides the main unit and the water unit; the other items in the illustration
are necessary spare parts for the water system ,that provided by users or the installer.
Attention:
Please follow these steps when using for the first time
1.Open valve and charge water.
2.Make sure that the pump and the water-in pipe have been filled with water.
3.Close the valve and start the unit.
ATTN: It is necessary that the water-in pipe is higher than the pool surface.
The schematic diagram is for reference only. Please check the water inlet/outlet label on the
heat pump while plumbing installation.
Chlorinator cell
Water inlet
Sand filter
(or other type filter)
6
Water outlet
Pool
Water pump
Valve
Water supply