View Battery Status When Drive Is Off - Western Digital my passport wireless Usre Manual

Activity/Wi-Fi LED
The Activity/Wireless LED is off when you take the My Passport Wireless drive out of the
box.
Activity/Wireless LED Behavior/
Color
Off
Solid blue
Solid orange
Solid red
Blinks blue for a set period (1 minute)
Blinks white
No change in color or behavior
Solid white
LED pulsating white
Blinking red with Power LED and Wi-Fi
alternating
Blinking red in one long (3 sec) and 3
short blinks (blink speed)
Power LED blinking in its current color
and Wi-Fi LED off

View Battery Status When Drive is Off?

Reset Your Drive
You can reset your drive two ways: manually and on the dashboard's Admin page (see....)
1. To reset your drive, hold down the Power and Wi-Fi buttons at the same time for
around 15 seconds until the drive reboots
MY PASSPORT WIRELESS
USER MANUAL
Indicates ...
Connecting wireless during boot-up
Wireless network connected or active (all modes)
Wireless network connected to access point (AP)
but no Internet connection (shared connection
mode
Wireless network failed or no network connection
(all modes)
WPS initiated and in progress
Device in use, for example:
• File transfer in DAS mode
• SD card copy/transfer
• Firmware update
• Reset
File transfer in NAS mode
Drive not in use in DAS mode
Drive going into sleep mode in DAS mode
Drive has a problem
Device has entered recovery mode (drive waits for
firmware to be placed in either SDD card or HDD
image)
Device shutting down
and the power LED flashes white.
HOW DO I?
27