Select Neutral, engage the parking
7
brake, and turn the ignition switch to
the "LOCK" position.
When the LFA is completely loaded
8
onto the transport vehicle, secure it
with tire belts and chocks.
Be careful not to damage the tires with the
edge of the chocks.
Disabling the tilt sensor
If the tilt sensor is left on when loading the LFA onto a transport vehicle, the auto
alarm may activate.
Stop the engine and remove the
1
key.
Press the tilt sensor cancel switch
2
located inside the glove box.
While the indicator is flashing faster
3
than normal, close all the doors and
lock the vehicle using the wireless
remote control.
102