Lexus LFA Owner's Manual page 103

Release the belt and take out the tool
2
bag.
Take the towing eyelet and flathead
screwdriver.
Remove the eyelet cover using a
3
flathead screwdriver.
To protect the bodywork, place a rag between
the screwdriver and the vehicle body, as shown
in the illustration.
Insert the towing eyelet into the hole
4
and tighten partially by hand.
Completely lower the transport vehicle's flatbed and attach its cable to the towing
5
eyelet.
Slowly wind up the transport vehicle's
6
cable, being careful to avoid contact
between the LFA and the flatbed.
Use additional ramps if necessary.
101
When transporting the vehicle