Toyota Camry Hybrid 2018 Owner's Manual page 252

252
4-5. Using the driving support systems
Changing settings of the pre-collision system
■
Enabling/disabling the pre-collision system
The pre-collision system can be enabled/disabled on
display) or
tion display.
The system is automatically enabled each time the power switch is
turned to ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
■
Changing the pre-collision warning timing
The pre-collision warning timing can be changed on
display) or
tion display.
The operation timing setting is retained when the power switch is turned
off.
1
Far
The warning will begin to oper-
ate earlier than with the default
timing.
2
Middle
This is the default setting.
3
Near
The warning will begin to oper-
ate later than with the default
timing.
(7-inch display) (→P. 105, 119) of the multi-informa-
(7-inch display) (→P. 105, 119) of the multi-informa-
(4.2-inch
(4.2-inch