Toyota Camry Hybrid 2018 Owner's Manual page 207

■
When the steering lock cannot be released
A message informing the driver that the
steering wheel is locked will be displayed
on the multi-information display.
Check that the shift lever is set in P. Press
the power switch while turning the steer-
ing wheel left and right.
■
Steering lock motor overheating prevention
To prevent the steering lock motor from overheating, the motor may be sus-
pended if the hybrid system is turned on and off repeatedly in a short period
of time. In this case, refrain from operating the hybrid system. After about 10
seconds, the steering lock motor will resume functioning.
■
When a message requesting the smart key system be inspected is dis-
played on the multi-information display
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer immediately.
■
If the "READY" indicator does not come on
In the event that the "READY" indicator does not come on even after perform-
ing the proper procedures for starting the vehicle, contact your Toyota dealer
immediately.
■
If the hybrid system is malfunctioning
→P. 78
■
If the electronic key battery is depleted
→P. 455
■
Operation of the power switch
●
If the switch is not pressed shortly and firmly, the power switch mode may
not change or the hybrid system may not start.
●
If attempting to restart the hybrid system immediately after turning the power
switch off, the hybrid system may not start in some cases. After turning the
power switch off, wait a few seconds before restarting the hybrid system.
■
If the smart key system has been deactivated in a customized setting
→P. 509
4-2. Driving procedures
207
4