Toyota Camry Hybrid 2018 Owner's Manual page 204

204
4-2. Driving procedures
Power (ignition) switch
Performing the following operations when carrying the elec-
tronic key on your person starts the hybrid system or changes
power switch modes.
Starting the hybrid system
1
Check that the parking brake is set.
2
Check that the shift lever is in P.
3
Firmly depress the brake pedal.
and a message will be displayed on the multi-information display.
If it is not displayed, the hybrid system cannot be started.
4
Press the power switch shortly
and firmly.
When operating the power switch,
one short, firm press is enough. It
is not necessary to press and hold
the switch.
If the "READY" indicator turns on,
the hybrid system will operate nor-
mally.
Continue depressing the brake
pedal until the "READY" indicator
is illuminated.
The hybrid system can be started
from any power switch mode.
5
Check that the "READY" indicator is illuminated.
The vehicle will not move when the "READY" indicator is off.
Stopping the hybrid system
1
Stop the vehicle completely.
2
Set the parking brake (→P. 220), and shift the shift lever to P.
3
Press the power switch.
Driving-related data will be displayed on the multi-information display.