Turn signal lever
Operating instructions
1
Right turn
2
Lane change to the right (move
the lever partway and release
it)
The right hand signals will flash 3
times.
3
Lane change to the left (move
the lever partway and release
it)
The left hand signals will flash 3
times.
4
Left turn
■
Turn signals can be operated when
The power switch is in ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
■
If the turn signals stop flashing before a lane change has been per-
formed
Operate the lever again.
■
To discontinue flashing of the turn signals during a lane change
Operate the lever in the opposite direction.
4-2. Driving procedures
219
4