Toyota Camry Hybrid 2018 Owner's Manual page 114

114
2. Instrument cluster
Menu icons
Select a menu icon to display its content.
Warning message display (→P. 490)
This menu icon will be displayed only when a warning message can be
displayed.
Select to display warning messages and measures to be taken if a mal-
function is detected.
Eco-friendly driving information (→P. 115)
Select to display fuel consumption data in various forms.
Driving assist system information
Select to perform the following:
Display the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (→P. 270)
• LDA (Lane Departure Alert with steering control) (→P. 260)
Display the following navigation system-linked information (if equipped):
• Route guidance
• Compass display (heading-up display)
Audio system-linked display
Select to enable selection of an audio source or track on the meter
using the meter control switches.
Vehicle information
Select to perform the following:
Display the following information:
• Energy monitor (→P. 135)
• Tire inflation pressure (→P. 429)
Enable/Disable the following systems:
• Intuitive parking assist (if equipped) (→P. 304)
• BSM (Blind Spot Monitor) function (if equipped) (→P. 290)
• RCTA (Rear Cross Traffic Alert) function (if equipped) (→P. 290)
This function can also be enabled/disabled on
Settings display (→P. 119)
Select to change the meter display settings and other settings.
.