Creating A Route On A Chart/Gps Plotter Page; Trails - Lowrance HOOK2 7x GPS TS Quick Manual

Creating a route on a chart/GPS Plotter page

1.
Activate a full screen page or maximize the panel on a
multi-panel page
2.
Press the Menu/Enter key to activate the menu, then select the
the menu
3.
Press the Arrow keys to position the first route point, then press Menu/Enter key to
confirm the position
4.
Repeat step 3 to position additional route points
5.
Press the X key to save the route

Trails

The system automatically tracks and draws the vessel's movement on the
chart/GPS Plotter panel. Trails are managed from the Trails dialog.
To display the trails dialog:
1. Waypoints, Routes, Trails
Select
2. Trails
Select the
3.
Select the trail you want to edit
Change chart source if card is inserted
¼ Note: Charts not available for 7x TS models.
|
4
HOOK2 series |
tab in the dialog
Quick Guide - EN
from the Home page
New route
option in