Table of Contents
Advertisement
Attach the diagonal support beam ( Fig 6).
Mounting Right Extension Table Attach right extension
table to the machine table and put surfaces in level. Fig 7
The right table extension has an adjustable support leg (V).
Info:
Table alignment can be achieved quickly, by tapping it with a
block of wood Fig 8.
Check that table surfaces and edges are aligned, then firmly
tighten the screws.
Fig 6
Fig 7
Fig 8
Mounting rip fence rail
Insert 4-M10x80 hex head bolts into major table and
extension tables. Loosely attach 2-M10 hex nuts to each
bolt.
Screw the four bolts into rip fence rail, just 4-5 circles.
First tighten two bolts to align the rail parallel With the table.
Then tighten another two bolts. Fig 9
Mounting rip fence
Mount the rip fence to the rip fence base rail. Fig 10
Mounting the main blade elevation & angle handwheel
Fitting the elevation handwheel(1) and angle handwheel (2)
onto the elevation and angle shaft.
Screw the blade lock knob(3) onto the elevation Handwheel.
Fig 11.
Fig 9
Fig 10
Fig 11
Hide quick links:
Advertisement
Table of Contents
