Graco 96G017 Instruction Manual page 12

Installation
Alarm Output and Remote Illumination Response
The following tables include graphical representations of the connector as it appears on the unit, a pin-out associated
with the connector and a typical installation wiring diagram. An internal representative wiring diagram is included
where it is deemed useful.
Wire colors provided on these pages only refer to the power cable provided by Graco with this product.
Unit in OFF Mode
Unit in ON Mode
Warning Condition
Fault Condition
Fault Condition
(Advanced Programming
Setting A7 OFF)
Fault Condition
(Advanced Programming
Setting A7 ON)
Alarm Relay Response
N.O.
No Faults or
Warnings
N.C.
N.O.
Warning
N.C.
N.O.
Fault
(Advanced
N.C.
Programming A7
OFF)
Fault
N.O.
(Advanced
Programming
N.C.
Setting A7 ON)
12
Alarm Output
Deactivated (off) Off
Deactivated (off) On
Toggles On and Off once
Activated (on)
per second
Toggles On and Off Toggles On and Off once
once per second per second
Toggles On and Off Toggles On and Off once
once per second per second
Toggles On and Off once
Activated (on)
per second
Output Tied to Common
1 second
Standard Remote
Illumination
(via 5 wire CPC power
cable)
Tri-Color Remote
Illumination
(via illuminated manual run
input)
Off
Green
Yellow
Red
Red
Red
332305B