INOKIM LIGHT 2 Super User Manual page 22

Hide thumbs

Advertisement

SPEED MODE
When power is on
The default display is
You may change it using the
Speed mode: this function is to limit the maximum
speed of the scooter, either for a beginner user or for
more accurate riding in a crowded surrounding:
speed mode 3 - using full throttle will gain maximum
speed of the scooter, 25KM/H at default.
speed mode 2 - using full throttle, will gain 70% of scooter top speed.
speed mode 1 - using full throttle, the maximum speed will be under10 KM/H
SETTINGS - DISPLAY MODES
To enter the display modes settings :
Touch
Press
to switch between modes
Long press
LCD BACKLIGHT
When power is on, you can open or close the LCD backlight by long press
There are 3 levels for different LCD brightness.
Press
to change level from 1 to 3 (low/middle/high).
Long touch
Short touch
SPEED LIMIT MODE (second mode)
Default and highest speed 25KM/H at full throttle.
You can define other speed limits (from 6KM/H to 35KM/H).
Press
or
Long touch
Short touch
THROTTLE OPERATION
SPEED
mode (appear at top right).
buttons together for 2 seconds will enter in the first mode.
will return to main function menu.
(
first mode)
to save settings.
to enter second mode.
buttons to change speed limit number.
to save setting.
to enter third mode.
buttons.
2 0

Hide quick links:

Advertisement

loading