Product parts Product Parameters Control USB charging port Handlebars MINI 2 T-Bar Size Open (length*width*height): 100cm*38.4cm*113.5cm Folded (length*width*height): 96cm*38.4*30cm Quick release latch Weight (with battery) 10kg mounted on the other side Steering locker hook Finish Automotive grade paint + electrostatic spray + Adonized Anodize treatment...
Controls Unfolding Mini-2 A. Pull the red hook outward to release C. Open the quick release and pull up the Power display the steering rod and unfold MINI-2 T-bar to the appropriate height Acceleration On/Off USB charger port Deceleration 2. Lock the safety lock Operation Basic operation Tips...
Folding Mini-2 Carrying the MINI-2 A. Open the quick release and push the T-bar C. Pull the pole down to interlock with the rear Carrying mode Roll along mode Trolly mode down mudguard 2. Pull up the safety lock Charging Steering locker hook B.
3. You can use a rag to wipe the scooters tires and mudguards. Wipe them with a dry cloth as soon 3. Check your INOKIM every time you drive it and if you find any loose or damaged parts do not as possible and place the scooter in a well ventilated place to avoid corrosion of metal parts.
7. Any attempt to disassemble the battery will damage the battery and release toxic substances. 8. You can only use the charger provided by INOKIM. 9. Transport the battery of INOKIM according to the relevant laws and regulations of the country or region.